How to communicate between different brands of ble products of Bluetooth module

With the latest firmware v549, the main functions are as follows
-Master slave integration
-Supports ibeacon
-Support firmware upgrade
-Support custom UUID customization in slave mode
-Support single UUID or dual UUID in slave mode
-Support intelligent self-learning function in main mode
HM-10 bluetooth module-03
How to communicate between ble products of different brands
Please download the product manual compression blog and use “HM module learning function instruction generator. Exe”
Input the slave information of ble you want to communicate into the generator
If communication is possible, the generator generates a list of at instructions
According to the instructions in the list to configure the module, you can achieve module communication between different brands. Whether it is a 16 bit or 128 bit UUID, as long as you can determine the UUID and generate the instruction list with our command generator, you can use
-Support transparent transmission mode
-Support remote control mode
-Support acquisition mode
-8-way acquisition and 2-way remote control in acquisition mode
-Support for Apple ANCs
-Automatic / manual operation mode is supported in the host state
-Adjustable power
-Gain adjustable
-Optional write or write without response methods
-On chip power monitoring
-On chip temperature sensor
-There are more than 100 at instructions, but they can’t be used. No surprise

How to communicate between ble products of different brands
Please use “HM module learning function instruction generator. Exe”
Input the slave information of ble you want to communicate into the generator
If communication is possible, the generator generates a list of at instructions
According to the instructions in the list to configure the module, you can achieve module communication between different brands. Whether it is a 16 bit or 128 bit UUID, as long as you can determine the UUID and generate the instruction list with our command generator, you can use
Our products have the same package. The new products are compatible with the old ones. When upgrading, you don’t need to change your circuit, just replace it directly.
EDR(2.1): HM-06
BLE 4.0: HM-11
EDR+BLE: HM-13
BLE 4.1: HM-17
BLE 4.2: HM-19
The pins of the above modules are compatible. You can change different module products according to your project requirements without changing the circuit.

Still using Bluetooth 2.1?
It’s only a dime in size. The Bluetooth 4.0 ble module that can be connected with iPhone 4S or above, iPad 2 or above, Android 4.3 or above, and computer is in mass shipment!!!
Super many at instructions, more than 100 at instructions look forward to your experience
Super low standby power consumption 90ua ~ 400ua
☆Small Size: 13.5*18mm
Super long connection distance 100 feet / 60 meters
☆ super fast reaction speed 0.4 seconds
Android, apple and PC are all in common (with hm-15)
There is no byte limit for sending and receiving, up to 3K bytes / second
Do not need MFI
Full Android 4.3 support
Full support of PC communication (must cooperate with hm-15)

What are you waiting for?
HM series Bluetooth module hm-11, with Ti cc-2540 / 1 chip, only 13.8 * 18mm pin size and overall dimension are the same as hm-05, hm-06 and hm-07, which can be replaced directly.
The size is the same as hm-05 and hm06. It can be replaced directly, and the workmanship is excellent
If you need such a Bluetooth module, it can be controlled by both the lower computer and the upper computer. It can not only transmit data, but also remotely control the PIO. It has excellent workmanship and low price. Then HM series products are absolutely your first choice!


Post time: Nov-18-2019
WhatsApp Online Chat !
WhatsApp Online Chat !